Are you ready to throw away all of your industrial cleaning products and replace them with ONE environmentally safe product that will do the job of all of them? CLEAN ALL will work to clean your facility as well as your cars! This product has been specially formulated from a special blend of surfactants that will work like the strongest industrial cleaners, but CLEAN ALL contains NO harsh chemicals such as butyl or bleach.

Removes bugs from paint and chrome and glass! Works as an engine degreaser that will not damage rubber hoses or aluminum! Cleans high end rims including chrome, polished aluminum, hyper black, alloy and more!

Dilute CLEAN ALL 128:1 for a top performing car wash!

Are you ready to throw away all of your industrial cleaning products and replace them with ONE environmentally safe product that will do the job of all of them? CLEAN ALL will work to clean your facility as well as your cars! This product has been specially formulated from a special blend of surfactants that will work like the strongest industrial cleaners, but CLEAN ALL contains NO harsh chemicals such as butyl or bleach.

Removes bugs from paint and chrome and glass! Works as an engine degreaser that will not damage rubber hoses or aluminum! Cleans high end rims including chrome, polished aluminum, hyper black, alloy and more!

Dilute CLEAN ALL 128:1 for a top performing car wash!

CLEAN ALL will replace all of your products eliminating any guesswork on what product to use where! This one product will be the best product that you have ever seen in an Auto Scrubber! It will work on ALL floor surfaces, including tile, marble, concrete, carpet, or painted surfaces. It will remove the tough stains from high traffic marble walking areas, as well as the oil from the concrete parking structure! It can be used on painted walls, chrome surfaces, brick and stone surfaces, rubberized floors, tile, and more! This one product will work on all your floors and walls better than any industrial chemical product that you have tried. Best of all, the product is environmentally friendly and free rinsing!

Exterior Car Washing
CLEAN ALL will replace all of your products eliminating any guesswork on what product to use where! This one product will be the best product that you have ever seen in an Auto Scrubber! It will work on ALL floor surfaces, including tile, marble, concrete, carpet, or painted surfaces. It will remove the tough stains from high traffic marble walking areas, as well as the oil from the concrete parking structure! It can be used on painted walls, chrome surfaces, brick and stone surfaces, rubberized floors, tile, and more! This one product will work on all your floors and walls better than any industrial chemical product that you have tried. Best of all, the product is environmentally friendly and free rinsing!

Car Wax Removal
To remove old wax build-up simply dilute the concentrate 16:1 with warm or hot water. Apply the diluted solution to the paint surface. Allow it to stand for a few minutes. Do not let it dry. If necessary, reapply during the waiting period to keep the surface wet. After the product ahs sit for a few minutes, rinse well. You may have to repeat the process a couple times if there are multiple layers of old wax to remove. Hot water will produce better results.


Engine Washing – Painted Engine Parts and Chromed Parts
Be sure that the engine is cool. Dilute the concentrate 1:8 for this type of heavy cleaning. Spray liberally over entire engine surface. Let the solution set for a few minutes to break down the grease and grime, but do not let the solution dry. You can spray more solution on the surface while the product is working to keep it wet. After the solution has set on the surface for a few minutes, rinse thoroughly. If there are extremely soiled areas, you can use a brush to agitate the soil and repeat the process with the solution.

NOTE: Most degreaser cleaners will tell you not to use their products to clean your entire engine because the chemicals in their products will damage aluminum, rubber belts and hoses, or painted surfaces. Many chrome pieces are actually painted and not true chrome. Quick Care Clean All is SAFE on your entire engine. You can degrease the engine without worry of damaging the aluminum or painted surfaces. Since Quick Care Clean All has NO butyl or harsh chemicals, it will not deteriorate your rubber belts or hoses either. What it will do is leave your engine clean and looking great!

Plastic Instrument Panels and Convertible Tops
When cleaning the car, you will not find a product that is as versatile as Quick Care Clean All. It is safe on plastic or vinyl, and will do an incredible job on your convertible top! Simply dilute 16:1 for great results.


Rims
Clean All will work to remove brake dust, oil, road grime and more from all specialty rims. The recommended dilution for rims is 1:64. The patented formula is safe on all rim surfaces including aluminum, alloy, stainless steel, painted rims, polished aluminum, hyper black, and more!

Runoff
Cleaning on the street, in the driveway or garage: Quick Care Clean All is non-toxic and biodegradable. This means that when using the product, there is no need to worry about any harmful effects to the environment. The product can be freely rinsed away onto the lawn or into the soil. Quick Care Clean All will biodegrade into the ground without damaging neighboring grass, flowers, trees, or shrubs.

Quick Care Clean All will work magic on your carpets, rugs, and upholstery! It can be used as a spot cleaner or in a cleaning machine for amazing results. As a spot cleaner, dilute the concentrate 1:16 and in machines you can add 1 oz. of cleaner per gallon of water (1:128).

NOTE: Prior to cleaning a large surface, it is recommended that you spot test an inconspicuous area of the carpet or upholstery to be sure that the material is colorfast.

Quick Care Clean All works amazing on cement and concrete. The product will lift dirt and oil from the surface where it can be easily rinsed away. For heavily soled surfaces, dilute the concentrate 1:8. For lightly soiled surfaces, a 1:32 dilution will work just fine. For the best results, it is important to apply the diluted solution to a DRY surface. Do not wet the concrete or cement before applying the solution! If you wet it first, the surface will “soak up” the water and it will not be able to “soak up” the solution when it is applied. Sealed concrete may require a stronger dilution ratio to get the best results. After the solution is applied to the surface, brush the area with a push broom to clean. More heavily soiled areas may require more brushing with a smaller hand held brush. For the BEST results, rinse the area with hot water after brushing.
TIP: Work in sections to avoid having the solution dry on the floor prior to rinsing.

Most degreaser product manufacturers suggest that their product not be used on chrome, because often times what you think is chrome is actually something that is painted to look like chrome. If you use an industrial degreaser on painted surfaces, the high pH (acidity) of the product will damage the surface. With Quick Care Clean All, you do not have to worry about these issues. Whether the surface is chrome, or painted to look like chrome, Clean All is SAFE! Use a 1:128 dilution for regular maintenance of your chrome surfaces.

Sealed grout can be cleaned using a 1:32 diluted solution of Clean All. For colored grout, a 1:64 dilution is recommended, as many colored grout surfaces are not colorfast. It is always a good idea to test colored grout to be sure that the color can not be "cleaned" out.

To clean grout, simply apply the solution the grout, and brush it in. The product will restore the grout making it look clean and new!

NOTE: For bathroom grout, or grout with lime scale or soap scum, Clean All will not be effective as you need a HIGH pH cleaner to remove these. The pH of Quick Care Clean All is too close to neutral and will not be effective in this application.

Brick and Granite Masonry

Quick Care Clean All will work great to clean brick or granite inside or outside your home. For inside work or less soiled surfaces, dilute the product 64:1 and apply directly to the dry surface to clean. Outside applications, or more heavily soiled brick and granite may require a more concentrated dilution.

Granite, Marble, and Quartz

Quick Care Clean All is the only product on the market that you will find that is strong enough to degrease your engine yet safe enough to use on granite, marble, and quartz. The patented formula is pH balanced to make it safe on natural stones, while still remaining strong enough to cut the toughest oil and grease! Dilute 64:1 for regular maintenance on natural stones and tile.

Oils

Quick Care Clean All will amaze you with how it easily removes messy oils. The solution bonds with the oil and lifts it from the surface where it can easily be wiped away. Below are some common types of oils and tips on how to deal with them:

Cooking Oils

Cooking oils can be a task to clean, but Clean All makes it easy. Simply dilute the concentrate 1:16 for light cleaning such as range tops, counter tops, hoods, or the backsplash. Spray the product onto the surface and allow a minute for it to go to work. Once the solution bonds with the oil, it will release it from the surface so that is can easily be wiped away. Some of the toughest cooking oil areas are kitchen floors in restaurants. Once you try Clean All, you will never use anything else again. You have to see it to believe it!

Petroleum Oils

The performance of Clean All on petroleum oils will amaze you! From industrial machine shops, to auto mechanic shops, to the garage work shop, Clean All will tackle the toughest oil, grease, tar, and asphalt messes! The recommended dilution for maintaining moderately soiled surfaces is 1:16. If there are areas of heavy petroleum soils, a stronger dilution will be necessary (up to 1:2 for extreme situations).

Clean All will be the safest and most effective product that you have ever seen on rubberized floors. It will remove the worn in grime from high traffic areas like magic. This product is a must have for:

Playgrounds · Gym Flooring · Running Tracks · Amusement Parks · Stadiums

Clean All contains NO harmful chemicals that could damage the rubberized floor. Many degreasers will damage or discolor the floor due to the high pH of the products. Clean All has a balanced pH that is safe on all rubberized floors. It will leave the floor clean and residue free! You have to see it to believe how well that it will work! It can be used in an auto scrubber or by hand with a push brush. Dilute the product 1:32 for regular maintenance (up to 1:8 for extremely dirty areas).

Stop wasting time and money repainting walls and floors and start cleaning them. Most degreasers pull the oil out from the paint leaving it discolored and causing it to crack. Clean All will make the surface look like NEW without ever damaging the paint! It can be used on painted floors such as patios or parking garages to remove grease, oil, and grime. Even soiled high traffic areas will look amazingly clean! Use Clean All on painted walls instead of repainting. Often times they really just need to be cleaned. This will save both time and money! For floor maintenance and cleaning of walls dilute 1:32. For heavy cleaning in high traffic areas, dilute 1:8.